OpenTunnel Designer Help

Construction

Note: Select a link to "jump" to the desired Construction group.


Construction ribbon interface

Excavation



Excavation group

Setting Description


Excavation Subspaces

Used to create excavation subspaces solids on the active tunnel unit, based on the excavation subspaces geometry defined on the tunnel template.

Confinement



Confinement group

Setting Description


Shotcrete



Permanent Wall
Used to create shotcrete permanent wall solids on the active tunnel unit, based on the shotcrete permanent wall geometry defined on the tunnel template.


Temporary Wall
Used to create shotcrete temporary wall solids on the active tunnel unit, based on the shotcrete temporary wall geometry defined on the tunnel template.


Jet Grouting


Crown & Floor
Used to create jet grouting - crown&floor solids on the active tunnel unit, based on the jet grouting - crown&floor geometry defined on the tunnel template.


Front Tail
Used to create jet grouting - front tail solids on the active tunnel unit, based on the jet grouting - front tail geometry defined on the tunnel template.


Forepoles
Used to create forepole solids on the active tunnel unit, based on the forepole geometry defined on the tunnel template.


Fiber Glass
Used to create fiberglass solids on the active tunnel unit, based on the fiberglass geometry defined on the tunnel template.


Rock Bolts
Used to create rock bolts solids on the active tunnel unit, based on the rock bolts geometry defined on the tunnel template


Modify Reinforcements
Used to modify reinforcements groups which are placed on the active tunnel unit.